Author Archives: Love Dome
What factors will influence the click feeling of the metal dome after assembly on PCB
We always get feedback from customers that the click of dome switch or metal dome is not good after assembly on PCB, what reasons cause this issue? That’s what they care about most. Today I will analyze it from the … Continue reading →
Posted in Metal Dome Assembly, Metal Domes, Others
|
Comments Off on What factors will influence the click feeling of the metal dome after assembly on PCB
New product launch in line
Good news, we developed and new prouct and lauched in line now! An special square metal dome with Ă 3.0 hole in center, Â which allow you place an LED on the PCB board directly. The dome dimension is 7.4*7.4mm, standard … Continue reading →
What problem or issue would have if the metal dome height and PET adhesive size are not suitable?
Recently, we got feedback fron one of our customers that found Plastic of Dome Switch bulge and peel off as below photo when production after assembly dome array on PCB, we could see the place from the red arrow. Why … Continue reading →
Posted in metal dome array, Metal Dome Assembly, Metal Domes
|
Comments Off on What problem or issue would have if the metal dome height and PET adhesive size are not suitable?
What the difference between metal dome with dimple and without dimple?
We had knew that metal dome has different types, without dimple and with one or several dimples, but do you know what the difference between with dimple and without dimple? The biggest difference is the difference in conduction stability, the … Continue reading →
Posted in metal dome array, Metal Domes
|
Comments Off on What the difference between metal dome with dimple and without dimple?
How to improve the metal dome assembly efficienc?
As the labor cost increase every year, more and more customer pursue the assembly efficiency of metal dome. So how to increase the assembly efficiency? There are many methods for metal dome assembly, such as the triangle with legs is … Continue reading →
Posted in metal dome array, Metal Dome Assembly, Metal Domes
|
Comments Off on How to improve the metal dome assembly efficienc?
Whatâs air vent hole and function of it on dome array?
The hole on PET around metal dome or the slot between dome and dome is called the “vent hole” or âvent slotâ, which is very important for the normal operation of metal dome. It will result in poor feel and affect the function of … Continue reading →
Posted in FAQ, metal dome related, Metal Domes
|
Comments Off on Whatâs air vent hole and function of it on dome array?
Can metal dome be weld on PCB board?
We know there are different assembly methods for metal dome, such as metal dome with legs can insert in PCBâs pin hole to fix, similar like below picture. Most of the dome switch with legs are triangle type. It has … Continue reading →
Posted in metal dome array, Metal Dome Assembly
|
Comments Off on Can metal dome be weld on PCB board?
Can metal dome sheet go through high temperature furnace?
Some customers could ask whether metal dome array or dome sheet can pass high temperature furnace? The answer is no. Why some customers would have such a request? That’s because they need to do the welding and soldering process after place the … Continue reading →
Posted in metal dome array
|
Comments Off on Can metal dome sheet go through high temperature furnace?
How to increase the click feeling of metal dome?
We know the click feeling of metal dome largely affects the use of the whole products, so how should we do to improve the click feeling of metal dome? Here are the answers: Tape & Reel Metal Dome manufacturers in … Continue reading →
Posted in FAQ, metal dome array, Metal Dome Assembly
|
Comments Off on How to increase the click feeling of metal dome?
Why need to add an plunger (actuator) on metal dome array?
Why the customer want to make an plunger or actuator  on the top layer of metal dome array? There are two main functions: Tape & Reel Metal Dome manufacturers in Austria, Dome array manufacturing Read 1. Increase the total height of overall product; 2. Increase the touch and … Continue reading →
Posted in Metal Dome Assembly, Metal Domes
|
Comments Off on Why need to add an plunger (actuator) on metal dome array?