What is Four Legs Series Metal Domes?0

Four legs series metal domes (also named as 4-leg tactile metal domes, F-series metal domes or cross metal dome) are four-legged dome designed specifically for mounting on a wide variety of switching surfaces, including single or double-sided printed circuit boards, flex circuits, and membrane switch panels, where traces of negative and positive can designed under the dome on the same side of circuits.

The four legs metal dome can achieve high actuation forces and tactile relative to their size, in the meantime, they are available in a wide variety of sizes and actuation forces.

F-series metal domes has better click feeling than Circle and Oblong series domes, and its life cycle is longer than Triangle dome, its normal life times are >= 1 million. The height of it is higher than other domes, based on the same diameter, force and clicking ratio. That’s why the cost of cross metal dome is higher than others.

In addition, the size of F series metal dome can be made from 5mm to 20mm in a range of (trip) force, typical 125- 500 gf. The trip force, rebound/return force, click, travel, and height, etc., can be adjustable according to clients’ request. No matter what size or force you require, we’ll do our best to produce it. Contact us now for more!

The basic specifications of Four-Leg Metal Dome:

Contact Configuration: SPST, Normally Open

Contact Bounce (on) : <.3ms

Contact Bounce (off) : <6ms

Operating Temperature: -55 C to 125 C

Storage Temperature: -55 C to 125 C

Humidity: 0-97% (no condensation)

Contact Resistance:<100 ohms

With Nickel plating: <1 ohm

Gold or silver plating: <0.1 ohm

Voltage/Current Maximum: 12 ma @ 24 volts DC

Breakdown Voltage: Over 200 volts

Types of Four-Leg Metal Dome

Best Technology is a professional metal dome manufacturer in China, which have more than 16 years fabricating experience in metal dome industry, we not only pack metal dome in normal bulk, but also can put each dome on an array and with Adhesive tape on its top, so that you can just peel off each piece and put it on key location of Keyboard/FPC/PCB. Welcome to contact us or visit our website if you need more information about Four legs metal dome.

You may also like

This entry was posted in Business. Bookmark the permalink.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.