Regarding the Four-leg metal domes, for small-medium volume production,
if people want a high assembly speed, but don’t have Automated SMT machine, we recommend us our metal dome in tube, as well as Peel & Place dome. And here, I’d like to say more words about metal dome in tube. Next article we will discuss another.
To use metal dome in tube, you must have a dome placement pen, or auto-pick-gun. You insert the tube into that device, then move the device above the place where you want to place a metal dome, then push a button, a dome will come out, to fall on that position.
Using tube dome, you only need to push the button to place the metal dome, and don’t need to pick a dome by a tweezers, so it’ll make dome placing become a easy job. You can put about 1,000-2,000 pcs per hour. In fact, some expert guy can reach up to 3,000 pcs, 5,000 pcs or more.
Also if you can send back the empty tube to us, we will give you some discount, but in most case, oversea customers will not do that, because shipping fee is more expensive than tube itself. But I think if some days later, the cost of tube increased and shipping cost lower down, people will consider to re-use them, in a green way. Just make sure the tube is clear, fresh from any dirt, dust.
All right, leave comments if you like this, or have some comments, or better idea to improve the tube metal dome.
